How to replace and install the crushing wall of a cone crusher
Release time:
2024-12-13 13:49
During the replacement Cone crusher Crushing wall and the concave, first check the degree of wear of the mantle, adjusting ring, locking threads, counterweights, and counterweight guard plates. If these crusher parts are severely worn, they should be replaced with new ones in time. When installing the liner plates, be sure to ensure that the center of the liner plates is aligned to avoid unnecessary secondary replacement and disassembly, thereby saving time and effort.
Replacing the cone crusher crushing wall
Cone crusher Crushing wall can also be carried out on site. First, the main shaft components need to be lifted out and placed on a solid platform to ensure that the dynamic cone and the spherical surface are not damaged. At the same time, seal all oil holes to prevent dust and impurities from entering. During disassembly, remove the distributor, locking nut, locking washer, and fusible gasket in sequence. Weld two lifting lugs on both sides of the old crushing wall (at a distance of 180 °), and use the lifting lugs to lift out the crushing wall. When installing the new crushing wall, weld the lifting lugs in the same position, install them in the reverse order of disassembly, and then remove the lifting lugs after completion.
It should be noted that the cone crushing wall is fixed to the cone body through the cone head, and zinc alloy is cast between the two. Replace the new Cone crusher Crushing wall After that, check its fastening status after running for 6-8 hours. If loosening is found, be sure to tighten it in time.
Cone crusher mantle,Broken wall replacement and installation,Crusher parts
Previous Page
Previous Page
RELATED INFORMATION
2025-04-11
60
2025-06-02
60
The main products of Duma Machinery include: rolling mortar wall, crushing wall and material dividing plate of cone crusher; jaw plate, side guard plate and pressing strip of jaw crusher; lining plate of ball mill, autogenous mill and other equipment; plate hammer and impact plate of impact crusher; hammer head, screen strip, lining block and other wear-resistant alloy steel parts of metal crusher.
Contact Information
Jiangxi Duma Machinery Manufacturing Co., Ltd.
Address: No.15, Jinhui Road, High-tech Zone, Yushan County, Jiangxi Province
Mobile:13957606188
Telephone:0793-2238555
Mailbox:ceo@dumajx.cn
Chinese website:Duma. Website Wear parts. Website
sweep
All rights reserved©2023 jiangxi duma machinery manufacturing co., ltd