How to adjust the gap of a cone crusher?
Release time:
2025-01-31 08:08
Adjusting the crusher performance of a cone crusher hinges on adjustment Cone crusher wall The gap between the cone crusher wall (i.e., moving cone) and the cone crushing wall (i.e., fixed cone). By raising or lowering the upper shell, this gap can be flexibly adjusted, precisely controlling the particle size of the crushed material.
1. Determine the reference position: Move the crushing wall close to the crushing wall
When adjusting a cone crusher, a reference position must first be determined; usually, this involves moving the cone crushing wall closer to The cone crushing wall This action helps lay the foundation for subsequent fine adjustments, ensuring optimal crusher operation.
2. Move the crushing wall to the operating position
Based on the reference position, the operator can raise or lower the upper shell to Cone crusher wall Accurately move to the required gap position. This adjustment process can be completed using the crusher's adjustment device to ensure that the gap between the crushing wall and the crushing wall meets production needs.
3. Adjust the product output particle size
By raising or lowering The cone crushing wall The position directly affects the particle size output of the crushed product. When the crushing wall is raised, the crusher gap increases, and the resulting product particles will be relatively larger; lowering the crushing wall reduces the gap, resulting in finer product particles. This adjustment not only helps meet different process needs but also effectively improves production efficiency and product quality.
4. Open-side setting (OSS) and closed-side setting (CSS)
The maximum distance between the crushing wall and the crushing wall is called the open-side setting (OSS), and the minimum distance is the closed-side setting (CSS). The open-side setting directly determines the size of the largest particles in the output material; therefore, a reasonable OSS setting is crucial for controlling product particle size and distribution. The closed-side setting determines the minimum particle size of the crushed material, which is crucial for fine crushing of the material.
By precisely adjusting the OSS and CSS, operators can achieve fine control of the crusher's output product particle size, optimize the crushing process, and improve production efficiency.
Adjusting the cone crusher Cone crusher wall The gap between the cone crushing wall is a key step in ensuring crushing effectiveness and product quality. By raising and lowering the upper shell and adjusting the position of the crushing wall, the crusher's performance can be flexibly changed to meet the needs of different production processes.
Adjust the cone crusher gap,Conical crusher wall,Conical roll mill wall
Previous Page
Next Page
Previous Page
Next Page
RELATED INFORMATION
2025-04-11
60
2025-06-02
60
The main products of Duma Machinery include: rolling mortar wall, crushing wall and material dividing plate of cone crusher; jaw plate, side guard plate and pressing strip of jaw crusher; lining plate of ball mill, autogenous mill and other equipment; plate hammer and impact plate of impact crusher; hammer head, screen strip, lining block and other wear-resistant alloy steel parts of metal crusher.
Contact Information
Jiangxi Duma Machinery Manufacturing Co., Ltd.
Address: No.15, Jinhui Road, High-tech Zone, Yushan County, Jiangxi Province
Mobile:13957606188
Telephone:0793-2238555
Mailbox:ceo@dumajx.cn
Chinese website:Duma. Website Wear parts. Website
sweep
All rights reserved©2023 jiangxi duma machinery manufacturing co., ltd