Duma Machinery's new alloy hammerhead improves crusher efficiency
Release time:
2025-02-21 08:42
The heavy hammer scrap iron crusher, with its powerful crushing capability, has become an indispensable equipment in the scrap metal recycling industry. Its core component— Scrap Iron Crusher Hammer Head , directly impacts the equipment's working efficiency and service life.
I. Working Principle of Heavy Hammer Scrap Iron Crusher
The heavy hammer scrap iron crusher is mainly composed of components such as a main shaft, discs, hammer heads, and grates. Ten discs are fixed on the main shaft, and ten hammer heads are installed between the discs, allowing free swing. When the equipment operates, the main shaft rotates at high speed, driving the Scrap Iron Crusher Hammer Head to generate enormous kinetic energy, treating scrap iron by smashing, tearing, and crushing it into block-shaped or clump-shaped pieces. Compliant shredded material passes through the grate and falls onto the vibratory conveyor; non-compliant scrap iron continues to be “baptized” by the hammer heads within the crushing chamber until it meets requirements.
II. Heavy Hammer Scrap Iron Crusher Hammer Head : Wear-Resistant and Consumable, Choosing the Right Material is Key
As a core wear part of the scrap iron crusher, the wear resistance of alloy hammer heads directly affects the equipment's operating cost and efficiency. Due to the specific working conditions of scrap iron crushing, general materials for hammer heads cannot meet the demand; targeted design is necessary to ensure their wear resistance and service life.
III. DUMA Machinery's New Micro-Alloy Hammer Head: Enhanced Wear Resistance, Longer Service Life
In response to the actual working conditions of scrap iron crushers, DUMA Machinery has developed a new micro-alloy hammer head. Compared with traditional materials, this Crusher Hammer Head shows significant improvements in both wear resistance and service life, making it an ideal choice for scrap iron crushing operations.
IV. Wide Range of Applicable Materials for Heavy Hammer Scrap Iron Crusher
The heavy hammer scrap iron crusher can process various types of scrap metal materials, including but not limited to:
Scrap iron, scrap steel
Bicycles, motorcycles
Pig iron, cast iron
Sheet iron, light and thin materials
Iron and steel, thin iron sheets, thin iron, etc.
Choosing a professional hammer head manufacturer is essential to maximize the performance of your scrap iron crusher and create higher benefits!
Iron crusher hammer head,Hammer manufacturer,Alloy hammer head
RELATED INFORMATION
2025-04-11
60
2025-06-02
60
The main products of Duma Machinery include: rolling mortar wall, crushing wall and material dividing plate of cone crusher; jaw plate, side guard plate and pressing strip of jaw crusher; lining plate of ball mill, autogenous mill and other equipment; plate hammer and impact plate of impact crusher; hammer head, screen strip, lining block and other wear-resistant alloy steel parts of metal crusher.
Contact Information
Jiangxi Duma Machinery Manufacturing Co., Ltd.
Address: No.15, Jinhui Road, High-tech Zone, Yushan County, Jiangxi Province
Mobile:13957606188
Telephone:0793-2238555
Mailbox:ceo@dumajx.cn
Chinese website:Duma. Website Wear parts. Website
sweep
All rights reserved©2023 jiangxi duma machinery manufacturing co., ltd